(Bio)SECcurity² Column Compartments

Unsurpassed performance, flexibility, automation options and stability with specific solutions.

Spacious column compartments for multiple analytical and semi-preparative columns allow for convinient handling. Stackable compartments allow for small instrument footprints, stand-alone column compartments can be combined with all LC systems.

All column compartments can be used with typical GPC/SEC/GFC solvents including hexafluoroisopropanol (HFIP).

Overview

SECcurity² temperature controlled column compartment - P/N 404-2111 (85°C)
SECcurity² temperature controlled column compartment - P/N 404-2137 (110°C)

The SECcurity² GPC1260 thermostatted column compartment 85°/110° fits in a single stack for lowest bench space requirements. Two options are available: the thermostatted column compartment for temperatures up to 85° C and the version for temperatures up to 110° C. Maximum four full-length, 30-cm columns fit inside the column racks. Optional column switching valves can be added.

SECcurity² TCC6500 - P/N 409-0044
Stand-alone column compartment for more columns and convenient column handling and temepratures up to 80°C. The SECcurity² TCC6500 offers a spacious column rack and can be equipped with a manual injection valve or a column switching valve. Maximum six full-length, 30-cm columns or two 30-cm preparative columns fit inside. Standard: Equipped with clamps for analytical columns, optional: configuration with clamps for micro or preparative columns. 

SECcurity² TCC7000 - P/N 409-0045
Stand-alone, spaceous column compartment for highest convenience and temepratures up to 95°C. Maximum twelve full-length, 30-cm columns or six 30-cm preparative columns fit inside. Standard: Equipped with clamps for analytical columns, optional: configuration with clamps for micro or preparative columns. Optionally equipped with two integrated, motor driven valves.

Specifications

  TCC6500 TCC7000 Stackable Compartment
Maintenance and
safety-related features
error detection and display, gas and solvent leak detection and safe leak handling (pump shutdown), temperature control with safety shutdown error detection and display, leak detection and safe
leak handling, low voltages in maintenance areas
Communications RS232, LAN (option: p/n 401-0036) CAN-bus, RS232, APG Remote: ready, start, stop
and shut-down signals
Control remote (WinGPC ChromPilot), integrated controller WinGPC ChromPilot, Agilent CF,
ChemStation,  EZ Chrom, MassHunter
Display 2 line LCD optional: (Bio)SECcurity² controller (P/N 404-2136)
Temperature
Temperature range 4°C - 80°C;
min. temperature:  ambient - 15°C
4°C - 90°C;
min. temperature: ambient - 15°C
4°C - 85°C (110°C option);
min. temperature: ambient - 10°C
Temperature stability ± 0.1°C
Temperature accuracy ± 0.1°C ± 0.5°C, with calibration for 40°C
Columns and Options
Column capacity up to six 30 cm analytical columns or
2 preparative columns
up to twelve 30 cm analytical columns or
6 preparative columns
up to four 30 cm analytical columns
Options
  • manual injection valve w/wo trigger or
    manual column selection valve
  • additional clamps for micro, analytical
    or preparative columns
  • up to 2 integrated, motor driven column
    selection valves (2, 6 or 10 columns)
  • additional clamps for micro, analytical
    or preparative columns
  • pre/post column solvent thermostatization
    with heat exchangers
  • valve drive for fully integrated valve e.g.
    for column selection valve (8 columns)

Accessories

Additional clamps

Additional clamps to be installed in TCC6000, TCC6500 or TCC7000 thermostatted column compartment

  • for analytical columns with an ID of approx. 8 mm: P/N 409-0041 (8 clamps)
  • for micro columns with an ID of approx. 4 mm: P/N 409-0043 (8 clamps)
  • for preparative columns with an ID of approx. 20 mm: P/N 409-0042 (4 clamps)

Manual valve options with mounting kit 409-0046

  • manual injection valve with injection trigger: P/N 409-0002
  • manual column switching valve: P/N 409-9020

Motor driven valve kits

  • 2-column switching valve: P/N 409-0047
  • 6-column switching valve: P/N 409-0048
  • 10-column switching valve: P/N 409-0049

Back to

(Bio)SECcurity² Detectors


Add a single detector or any detector combination for advanced characterization techniques. Discover more...

SECcurity² GPC/SEC


For Analytical, HighSpeed and Semi-preparative GPC/SEC/GFC separations. Discover more...

(Bio)SECcurity² LC


The standard for successful analysis with GPC/SEC, IPC or 2D. Discover more...

X

Die Webseite ist für moderne Browser optimiert. In Ihrem Browser können Inhalte fehlerhaft angezeigt werden.