Standards Sorted by Type

PSS Perfect Separation Solutions > Products > Reference Materials > Standards Sorted by Type

Molecular Weight Standards, GPC/SEC Calibration Kits and Validation Standards

PSS supplies certified standards that meet the requirements of DIN 55672 and ISO/EN 13885. All reference materials are characterized with GPC/SEC to obtain molecular weight values. These values are subsequently confirmed by alternative methods such as Laser Light Scattering, Viscometry, MALDI-ToF, VPO and NMR.

Each product comes with a Certificate of Analysis, which provides the characterization information, the testing parameters, the molecular weight values (M_n, M_w, M_p, PDI) and the chromatogram. Calibration kits include a calibration report.

Standards Brochure

Contact me

Get a Quote

Buy Online

Products Sorted by Type - Click on the Material to open the Product List

˂ Back to List

Hydroxyethyl starch

Order No.	Nominal MW	Description	PDI	Packsize
PSS-HES40K	40000	Hydroxyethyl starch	<2,50	250,00
PSS-HES300K	300000	Hydroxyethyl starch	<2,50	250,00
PSS-HES24K	24000	Hydroxyethyl starch	<2,50	250,00

˂ Back to List

Poly(isobutylene)

Order No.	Nominal MW	Description	PDI	Packsize
PSS-pibkit		Kit Poly(isobutylene), 10 x 0.25 g, Mp 390 - 674 000 Da
PSS-PIB112	112	Poly(isobutylene)	=1,00	250,00
PSS-PIB390	390	Poly(isobutylene)	<1,30	250,00
PSS-PIB680	680	Poly(isobutylene)	<1,30	250,00
PSS-PIB1K	1000	Poly(isobutylene)	<1,30	250,00
PSS-PIB2.1K	2100	Poly(isobutylene)	<1,30	250,00
PSS-PIB3K	3000	Poly(isobutylene)	<1,30	250,00
PSS-PIB4.7K	4700	Poly(isobutylene)	<1,30	250,00
PSS-PIB7.2K	7200	Poly(isobutylene)	<1,30	250,00
PSS-PIB12K	12000	Poly(isobutylene)	<1,30	250,00
PSS-PIB16K	16000	Poly(isobutylene)	<1,30	250,00
PSS-PIB21K	21000	Poly(isobutylene)	<1,30	250,00
PSS-PIB24K	24000	Poly(isobutylene)	<1,30	250,00
PSS-PIB30K	30000	Poly(isobutylene)	<1,30	250,00
PSS-PIB47K	47000	Poly(isobutylene)	<1,30	250,00
PSS-PIB70K	70000	Poly(isobutylene)	<1,30	250,00
PSS-PIB80K	80000	Poly(isobutylene)	<1,30	250,00
PSS-PIB100K	100000	Poly(isobutylene)	<1,30	250,00
PSS-PIB120K	120000	Poly(isobutylene)	<1,30	250,00
PSS-PIB210K	210000	Poly(isobutylene)	<1,80	250,00
PSS-PIB600K	600000	Poly(isobutylene)	<1,80	250,00
PSS-PIB700K	700000	Poly(isobutylene)	<1,80	250,00

Specialties

Product	Download
Random copolymers	A selection of random copolymers with different compositions.
Block copolymers	A large selection of block copolymers with different chemistries and compositions.
Deuterated polymers	A selection of deuterated polymers. Material safety data sheet: SDS
Functionalized polymers	Reference materials with specific end groups or without initiator. Material safety data sheet: SDS
Star polymers	A selection of star branched polymers with 3 arms.

Polydispersity Index, PDI

The Polydispersity Index, PDI, is a measure of the width of the molar mass distribution. It is defined as ratio of the weight average molar mass M_w and the number average molar mass M_n, PDI =M_w/M_n.

PDI is 1 for monodisperse substances (no molar mass distribution), it is larger than 1 for the vast majority of all macromolecules. The PDI depends on the polymerization technique applied to produce the material. In praxis the PDI can be very large up to values of 100 and above. Narrow PDIs can only be obtained using controlled/living polymerization techniques.

Please refer to the literature section to learn more.

Narrow Standards
Broad Standards

Narrow polymer standards are made by controlled/living polymerization techniques (living anionic/cationic, ATRP, RAFT, etc.) or by fractionation of very broad standards.

All narrow standards have small polydispersity indices and exhibit a sharp and slim chromatographic profile.

The M_p value (molar mass at the peak maximum) is well defined and independent on the column resolution. As M_p is the only clearly defined point in the chromatogram this value is used to establish GPC/SEC calibration curves.

Standards with a narrow molar mass distribution are used:

to construct a GPC/SEC calibration curve using the provided M_p values
for the validation of a chromatographic system
for the determining of physical constants

Broad reference materials are made by radical polymerization, polycondensation or coordinative polymerization (polyolefins).

The PDI of broad standards is usually > 1.5. For broad standards the M_p value is a function of the column resolution. Molar mass values provided for broad standards are thus only the average molar masses M_w and M_n.

Modern GPC/SEC software packages allow for the construction of a calibration curve by the use of M_w, M_n or the intrinsic viscosity [η] of broad standards.

Standards with a broad molar mass distribution are used:

to validate a chromatographic system
to determine physical constants such as the Mark-Houwink constants K and ∝
to construct a calibration curve using broad calibration options
to test for porosity mismatch