Molecular Weight Standards, GPC/SEC Calibration Kits and Validation Standards

PSS supplies certified standards that meet the requirements of DIN 55672 and ISO/EN 13885. All reference materials are characterized with GPC/SEC to obtain molecular weight values. These values are subsequently confirmed by alternative methods such as Laser Light Scattering, Viscometry, MALDI-ToF, VPO and NMR.

Each product comes with a Certificate of Analysis, which provides the characterization information, the testing parameters, the molecular weight values (Mn, Mw, Mp, PDI) and the chromatogram. Calibration kits include a calibration report.

Products Sorted by Type - Click on the Material to open the Product List

  • Aqueous Mobile Phase
  • Organic Mobile Phase
  • Specialties

Aqueous Mobile Phase

Product Download

Material safety data sheet: SDS

Hydroxyethyl starch

Material safety data sheet: SDS

Poly(acrylic acid) sodium salt

Material safety data sheet: SDS


Material safety data sheet: SDS

Poly(ethylene glycol)

Material safety data sheet: SDS

Poly(ethylene oxide)

Material safety data sheet: SDS

Poly(methacrylic acid) sodium salt

Material safety data sheet: SDS

Poly(styrene sulfonate) sodium salt

Material safety data sheet: SDS

Poly(vinyl alcohol) broad

Material safety data sheet: SDS

Poly(2-vinylpyridinium bromide)

Material safety data sheet: SDS


Material safety data sheet: SDS


Material safety data sheet: SDS

Poly(2-vinyl pyridine) aqu

Material safety data sheet: SDS

Poly(vinyl pyrrolidone) broad

Material safety data sheet: SDS

Poly(alpha-methylstyrene sulfonate) sodium salt

Material safety data sheet: SDS

˂ Back to List
Order No. Details Nominal MW Description PDI Packsize
PSS-pibkit Kit Poly(isobutylene), 10 x 0.25 g, Mp 390 - 674 000 Da
PSS-PIB112 picture_as_pdf 112 Poly(isobutylene) =1,00 250,00
PSS-PIB390 picture_as_pdf 390 Poly(isobutylene) <1,30 250,00
PSS-PIB680 picture_as_pdf 680 Poly(isobutylene) <1,30 250,00
PSS-PIB1K picture_as_pdf 1000 Poly(isobutylene) <1,30 250,00
PSS-PIB2.1K picture_as_pdf 2100 Poly(isobutylene) <1,30 250,00
PSS-PIB3K picture_as_pdf 3000 Poly(isobutylene) <1,30 250,00
PSS-PIB4.7K picture_as_pdf 4700 Poly(isobutylene) <1,30 250,00
PSS-PIB7.2K picture_as_pdf 7200 Poly(isobutylene) <1,30 250,00
PSS-PIB12K picture_as_pdf 12000 Poly(isobutylene) <1,30 250,00
PSS-PIB16K picture_as_pdf 16000 Poly(isobutylene) <1,30 250,00
PSS-PIB21K picture_as_pdf 21000 Poly(isobutylene) <1,30 250,00
PSS-PIB24K picture_as_pdf 24000 Poly(isobutylene) <1,30 250,00
PSS-PIB30K picture_as_pdf 30000 Poly(isobutylene) <1,30 250,00
PSS-PIB47K picture_as_pdf 47000 Poly(isobutylene) <1,30 250,00
PSS-PIB70K picture_as_pdf 70000 Poly(isobutylene) <1,30 250,00
PSS-PIB80K picture_as_pdf 80000 Poly(isobutylene) <1,30 250,00
PSS-PIB100K picture_as_pdf 100000 Poly(isobutylene) <1,30 250,00
PSS-PIB120K picture_as_pdf 120000 Poly(isobutylene) <1,30 250,00
PSS-PIB210K picture_as_pdf 210000 Poly(isobutylene) <1,80 250,00
PSS-PIB600K picture_as_pdf 600000 Poly(isobutylene) <1,80 250,00
PSS-PIB700K picture_as_pdf 700000 Poly(isobutylene) <1,80 250,00


Product Download
Random copolymers

A selection of random copolymers with different compositions.

Block copolymers

A large selection of block copolymers with different chemistries and compositions.

Deuterated polymers

A selection of deuterated polymers. Material safety data sheet: SDS

Functionalized polymers

Reference materials with specific end groups or without initiator. Material safety data sheet: SDS

Star polymers

A selection of star branched polymers with 3 arms.

Polydispersity Index, PDI

The Polydispersity Index, PDI, is a measure of the width of the molar mass distribution. It is defined as ratio of the weight average molar mass Mw and the number average molar mass Mn, PDI =Mw/Mn.

PDI is 1 for monodisperse substances (no molar mass distribution), it is larger than 1 for the vast majority of all macromolecules. The PDI depends on the polymerization technique applied to produce the material. In praxis the PDI can be very large up to values of 100 and above. Narrow PDIs can only be obtained using controlled/living polymerization techniques.

Please refer to the literature section to learn more.

  • Narrow Standards
  • Broad Standards

Narrow polymer standards are made by controlled/living polymerization techniques (living anionic/cationic, ATRP, RAFT, etc.) or by fractionation of very broad standards.

All narrow standards have small polydispersity indices and exhibit a sharp and slim chromatographic profile.

The Mp value (molar mass at the peak maximum) is well defined and independent on the column resolution. As Mp is the only clearly defined point in the chromatogram this value is used to establish GPC/SEC calibration curves.

Standards with a narrow molar mass distribution are used:

  • to construct a GPC/SEC calibration curve using the provided Mp values
  • for the validation of a chromatographic system
  • for the determining of physical constants

Broad reference materials are made by radical polymerization, polycondensation or coordinative polymerization (polyolefins).

The PDI of broad standards is usually > 1.5. For broad standards the Mp value is a function of the column resolution. Molar mass values provided for broad standards are thus only the average molar masses Mw and Mn.

Modern GPC/SEC software packages allow for the construction of a calibration curve by the use of Mw, Mn or the intrinsic viscosity [η] of broad standards.

Standards with a broad molar mass distribution are used:

  • to validate a chromatographic system
  • to determine physical constants such as the Mark-Houwink constants K and ∝
  • to construct a calibration curve using broad calibration options
  • to test for porosity mismatch
keyboard_arrow_down keyboard_arrow_up

Die Webseite ist für moderne Browser optimiert. In Ihrem Browser können Inhalte fehlerhaft angezeigt werden.