Refine Results
- Products
-
Product Category
- Applications and Industries
-
Solution Category
- Content Type
-
Content Type
- Analysis Technique
-
- Analyzed With
-
Analyzed With
- Chemical Group
-
Chemical Group
- Compounds
-
Compounds
- Detection Technique
-
- Injection Technique
- Instrument
-
- Analysis Platform
-
Product
- Language
-
Language
Need help finding the right GPC/SEC Columns? Try our GPC/SEC Column Selector Tool
Recalibrate existing calibration curves automatically without manual interaction - Agilent WinGPC substitutes existing calibration points or builts average.
- Publication Part Number: 5994-6496EN
- Created: 01 Aug 2023
- 247 KB
Work more efficiently with less mouse clicks by using the high functionality button bar.
- Publication Part Number: 5994-6325EN
- Created: 01 Aug 2023
- 339 KB
GPC/SEC analysis of Alginate Sodium Salt in an aqueous hydrogen phosphate solution using Agilent SUPREMA columns.
- Publication Part Number: 5994-6271EN
- Created: 01 Aug 2023
- 2 MB
Characterize membranes and let WinGPC calculate the molecular cutoff.
- Publication Part Number: 5994-6328EN
- Created: 01 Aug 2023
- 390 KB
Quality testing for blood adsorber cartridges.
- Publication Part Number: 5994-6485EN
- Created: 01 Aug 2023
- 85 KB
Determine the molar mass distribution and the amount of residual monomer simultaneously with the Agilent WinGPC HPLC mode.
- Publication Part Number: 5994-6493EN
- Created: 01 Aug 2023
- 154 KB
Increase the precision of your results by co-addition of different sample runs.
- Publication Part Number: 5994-6323EN
- Created: 01 Aug 2023
- 399 KB
Time and solvent for the analysis of a sample on a dedicated column set can be reduced up to 35% with the WinGPC overlaid injection feature.
- Publication Part Number: 5994-6336EN
- Created: 01 Aug 2023
- 204 KB
Quantitative and qualitative investigation of degradation products can be performed with the Agilent WinGPC software.
- Publication Part Number: 5994-6491EN
- Created: 01 Aug 2023
- 141 KB
For higher sample throughput, the overlaid injection feature of Agilent WinGPC allows to save 30% time between two injections.
- Publication Part Number: 5994-6321EN
- Created: 01 Aug 2023
- 350 KB
Quantify the degree of degradation and use the Agilent WinGPC overlay function for sample comparison.
- Publication Part Number: 5994-6327EN
- Created: 01 Aug 2023
- 363 KB
GPC/SEC is a powerful tool to measure pore sizes, distributions and molecular cut-off of membranes. WinGPC supports this application with its overlay mode.
- Publication Part Number: 5994-6484EN
- Created: 01 Aug 2023
- 394 KB
Characterization of ion exchange resins.
- Publication Part Number: 5994-6248EN
- Created: 01 Aug 2023
- 150 KB
The differences between the WinGPC automation feature for active measurements and the WinGPC quick analysis tool are described.
- Publication Part Number: 5994-6335EN
- Created: 01 Aug 2023
- 288 KB
Pore size distribution for silica materials.
- Publication Part Number: 5994-6490EN
- Created: 01 Aug 2023
- 174 KB
Protect the pressure transducers of your viscometer using the Agilent WINChrom interface.
- Publication Part Number: 5994-6326EN
- Created: 01 Aug 2023
- 432 KB
Pore size investigation of catalyst supports.
- Publication Part Number: 5994-6483EN
- Created: 01 Aug 2023
- 131 KB
Determine volumes which do not correspond to a maximum or a minimum, for example when working with a fraction collector.
- Publication Part Number: 5994-6334EN
- Created: 01 Aug 2023
- 344 KB
Agilent WinCHROM or the LAN interfaces are equipped with output relays to control valves or to saveguide special instruments such as fraction collectors or viscometers.
- Publication Part Number: 5994-6489EN
- Created: 01 Aug 2023
- 158 KB
Use Agilent WinGPC to control a fraction collector.
- Publication Part Number: 5994-6333EN
- Created: 01 Aug 2023
- 372 KB